Sell water conductivity meter HANNA HI 98303 Dist®3 EC Tester for measuring water conductivity with 1 μS / cm resolution, contact: Mitra Water 0822 3333 4224
Advantages:
• Graphite electrode
• ATC
• One simple point calibration
•Easy to use
• Economical
DiST's are robust and reliable pocket-sized testers that offer fast and accurate conductivity or TDS readings.
DiST® testers are widely used to monitor EC / TDS in drinking water, water cooling, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry.
This tester has an amperometric graphite electrode that provides a better repetition of measurements because it does not oxidize. The EC amperometric measurement is based on Ohm's Law, I = V / R where R depends on the distance between the two pins and its surface. Oxidation changes the distance and surface that will affect its accuracy. Distilled graphite non-oxidizing pin is capable of providing an optimum surface for accurate and reliable results.
When calibration is required, simply stack the tip of the electrode into the calibration solution and set the trimmer on the side of the tester.
Ordering information:
HI 98303 (Dist 3) equipped with protective cover, screwdriver, battery and instructions.
Specification:
Range of 1999 μS / cm
Resolution of 1 μS / cm
Accuracy ± 2% F.S.
HI 70031 Calibration Solution
Manual calibration, 1 point
Probe HI 73303
Automatic Temperature Compensation, 0 to 50 ° C (32 to 122 ° F)
Battery Type / Living 4 x 1.5V / approx. 200 hours continue to use
Environment 0 to 50 ° C (32 to 122 ° F); RH max 95%
Dimensions 175 x 41 x 23 mm (6.9 x 1.6 x 0.9 ")
Weight 95 g (3.4 oz.)
MITRA WATER Jl. No Rose. 43 Surabaya
Tel: 031-5454849, 031 -5313509
Fax: 031-5313509
Hp: 081234590404, 087854449399, 085733669931
BB PIN: 5B1540B3
Email: [email protected]
Website: https://filterair.id
Malang Branch: Jl. Telaga Wangi Temple no. 48 Malang.
HP: 081216666753, 082233334224